Simple Battery Management Board (SBM)
The easiest way to protect a lithium battery pack. The SBM board manages a pack of cells and disconnects the load under any unfavorable circumstances: cell over voltage, cell under voltage.
The SBM is connected between the battery pack and the load and the charger. There are additional wires from single cells to the SBM to monitor each cell. (Marking of the contacts: B+/B- to connect to the battery; B1, B2, B3..... to connect to each cell; CH+/CH- to connect charger (optional); P+/P- the whole PACK (battery with SBM) output to the load.)
Check the PDF with detailed specification of the SBM boards and their installation.
See additional tips for the installation at the GWL/blog section for SBM
Voltage of the packs:
Please observe the maximal current of the pack including the peak currents when starting or connecting the equipment.
Note: the balancing currents of the SBM boards are very low (only few milliamps), this means it is not possible to balance large capacity cells. We suggest using additional CBU modules to increase the balancing current of the cells.
|Min. operating temperature (°C)||-40|
|Max. operating temperature (°C)||85|