- 3pcs - Solar module CanadianSolar Poly 300Wp 120 cells
- 1pc - MPPT Solar Charger 12/24/36V/48 V, 60A, Input 150V
- 1pc - MC4 T- branch connector 1 to 2
- 1pc - Connection cable 5 m solar MC4 M/F
- 1pc - MC4 cable branch connector 1 to 2
Technical specification of solar module
Peak power 300 Wp.
MPP voltage 32,7 V.
MPP current 9,18 A.
Voltage without load 39,3 V.
Short-circuit current 9,65 A.
Efficiency of solar panel 18,05 %.
Height 1675 mm.
Width 992 mm.
Depth 35 mm.
High quality Poly-crystalline PV modules with half cut cell technology and the best workmanship. Power output has positive only tolerance. Modules are framed by aluminum frame and PV cells are covered by tempered and resilient glass layer.
Canadian Solar‘s modules use the latest innovative cell technology, increasing module power output and system reliability, ensured by 16 years of experience in module manufacturing, well-engineered module design, stringent BOM quality testing, an automated manufacturing process and 100% EL testing.
- Half cut cell technology
- Standard dimensions
- IP68 junction box for long-term weather endurance
- Manufacture provides 25 years linear power output warranty and 10 years product warranty on materials and workmanship
Technical specification of MPPT solar charger
Max. power 3000 W.
Weight 4,5 kg.
Max output current 60 A.
Max. input voltage 150 V.
Nominal Voltage 12, 24, 36, 48 V.
Operating temperature -25°C up to 50°C (discharging)
Solar charger controller made by EPsolar is DC/DC charger with integrated advanced MPPT technology. It adopts the water-proof design with IP32 class and increase the professional protection chip for the communication port.
Main function of this charger is to harvest as much energy from your PV modules and charge connected battery as fast as possible, but with the best care for long battery lifetime.
For specific parameters, please click at Parameters
The charger has a LCD and control buttons for easy monitoring and settings.
The charger is delivered with default settings for lead-acid batteries. For change settings to lithium battery type, connection to PC via RJ45-USB cable is needed. Then use PC software for change the settings.
Please donwload PC Software for Solar Charger Controller
- This MPPT charger is suitable for any off-grid application. Tha charger has neutral grounding
- Battery type profiles: Sealed, Floated, Gel, User
- Efficiency of MPPT technology is no less than 99,5%
- Automatic limitation of the charging power and current
- Real time energy statistics function
- Support RS-485 communication bus interfase and Modbus communication protocol
- Wide range of electronoc protections
- PV over current
- PV short circuit
- PV reverse polarity
- Night reverse charging
- Battery reverse polarity
- Battery over voltage
- Battery over discharge
- Battery overheating
- Load short circuit
- Load overload
- Controller overheating
Note: Never let the solar charger connected with PV modules and without connected battery same time. Battery connection is mandatory, otherwise you it can damage the charger!