Victron Energy Battery Protect BP-200 12V/24V 220A

Victron Energy Battery Protect BP-200 12V/24V 220A
Manufacturer: GWL/Power
Art.#: VE-BP-220
96.20$List price:
Individual pricing for large scale projects and wholesale demands is available.
Contact us:
phone: +420 277 007 550
email: export@gwlpower.cz




Stock status : 1 pcs

Shipping weight: 1.20 kg
The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

Product description




12/24V auto ranging
The BatteryProtect automatically detects system voltage.
 
Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages.
The seven segment display will indicate which setting has been chosen.



A special setting for Li-ion batteries
In this mode the BatteryProtect can be controlled by the VE.Bus BMS.
 
Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.
 
Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage
exceeds 16V respectively 32V.
 
Ignition proof
No relays but MOSFET switches, and therefore no sparks.
 
Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than
12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof
open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to
activate a buzzer, LED or relay.
 
Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases
again to the connect threshold within this time period (after the engine has been started for example), the load
will not be disconnected.
The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset
reconnect voltage.
Weight (kg) 0,8
Max output current (A) 220
Height (mm) 62
Width (mm) 123
Depth (mm) 120
No files attached.
Victron Energy Battery Protect BP-200 12V/24V 220A The BatteryProtect disconnects the battery from non essential loads before it... 96.20$
18 visitors online.
All Rights reserved © 2019 GWL a.s.