Blog - Winston

FAQ: What to do with a swelling cell?

FAQ: What to do with a swelling cell?

03.Jan 2011
| Blog - Winston

 

FAQ: What to do with a swelling cell?

First: Analyze the reason for the swelling. Is the battery used properly? Is the BMS working correctly? Note: Do not use the cell any longer, if the cell has become swollen.

Second: Remove the cell, unscrew the safety valve to allow the internal pressure to be released. (Be careful not to spil the electrolyte from the cell).

Third: Put the cell under the pressure to renew its original shape. You may need to increase the pressure gradually as the cell returns to its correct shape. Please allow for many hours or even days to pass to renew the shape.

Fourth: Charge the battery correctly and check its parameters: What is the voltage? What is the capacity? Perform several cycles to get consistent results and to see if the cell can be used again.

Finally: Avoid the same situation to happen again. Remember there is no way to repair a cell that was damaged by improper use.

36 visitors online.
All Rights reserved © 2024 GWL Group a.s. - GShop v. 1.4.8