Can you recommend a device to protect a 12V LP battery?
In the past we used to offer a solution called . However due to a small demand, the production of Akumon was discontinued. We also offered some , Battery protector, Battery protect, PowerTector, etc.
GWL/Power team suggests that each customer may find a suitable solution to
LFP battery discharged to ZERO volts
Question: I have installed a LFP battery in my car. But when I came today to the car, the car was completely dead and all electronics stopped working. What is wrong?
Answer: What you describe may happen with the car. When the car is parked, over some day
Charging a single cell from a 5V USB adapter
Question: On your blog you wrote this: .
Warning: any battery charging must be continually monitored by human operator!
Note: the photo shows some “home-made” connection to charge a cell
Using a DC adapter to charge a battery
Question: Can I use this type of 12V/3A adapter to charge a 12V LP Battery?
Answer: Most likely no, you cannot use this adapter for changing, because the voltage of the DC adapter is too low to make the charging.
With 12V LP battery, the nominal volt
Question: I have BMS123-Smart with 4 cells. When I add more cells, they are not recognized by the system.
Answer:You need to change the setting of the BMS123-Smart to match the number of the cell that will be recognized.
See the. This setting allows changing thesize (rating
The answer depends on the type of application. See some examples.
1. Simple installations
Simple installations with one battery (12V) or with just a few cells do not need any special inspections. If you have an SMB to handle the protection of the pack, you can just monitor the voltage level. This kind of pack shou
Question: I need a 100V DC pack. How many cells do I need (for LFP or for LTO)?
Answer:The above table shows the various configurations of the number of the cells and the voltage levels that will be reached with the configuration.
For a 100V pack, the typical installation will
FAQ: Determining the size of cells based on current and operation time
Question: I need a battery pack to supply 60 Amp continuously for 8 hours. What size of the battery do you recommend?
Answer:The above table shows the size of the battery packs (in Ah) based on the 100% DOD (depth of d
GWL/Power is offering a variety ofLTO technologybased cells that allow to assemble the battery packs for special applications:
Check the basic specifications and dimensions of the LTO cells now available for your projects.
We will be happy to supply these cells fo