Blog - Electric Cars

FAQ: How to make a connection cable “Mennekes to...

FAQ: How to make a connection cable “Mennekes to Yazaki” ?

The solution is very simple. You will need the following products:

1. DSIEC2B

2. J1772-P5-16

Important details: Th

The EVSE Charging operation diagram

The EVSE Charging operation diagram

the functional wiring of the

FAQ: Mennekes type of EVCharge connectors - the resistor...

FAQ: Mennekes type of EVCharge connectors - the resistor value

The proximity switch PP (resistor value between PP a PE) is available for the vehicle to describe its input charging capacity to the charging station asking to limit the current. This is done by setting a resistor between the PP and PE wires – adapter cables

eCarTec booth design 

eCarTec booth design

The eCarTec exhibition is in partnership with CALB.

eCarTec update  - new booth location: HALL B3, booth 514

eCarTec update - new booth location: HALL B3, booth 514

For some technical reasons our location was moved to a new place marked as Booth B3.514.

We look forward to meeting you at eCarTec.

EVSE charging - manual switching between different power...

EVSE charging - manual switching between different power ratings

The EVSE project allows a simple switching between different charging speeds. Just install a switch and connect different resistor values (optionally you can set the value by changeable resistors, as seen in the

New product - Socket for Electric Vehicles according to SAE...

New product - Socket for Electric Vehicles according to SAE J1772-2009 including the cable with protection tube (1m, 16A).

The J1772-2009 socket is designed for single phase electrical systems with 120 V or 240 V such as those used in North America, Japan and is still supported by some European car manufacturers. (Renault, Peugeot, Citroen etc.) The connector is needed to use for system with 1 kHz square wave at +/- 12 volts generated by the Ele

Citroen B9E - Berlingo Electric model 2014

Citroen B9E - Berlingo Electric model 2014

GWL/Power is the promotion partner for Citroen Berlingo Electric the cargo van with 3 seats. Contact us for more details on this vehicle.

Nissan Leaf Cargo - initial photos

Nissan Leaf Cargo - initial photos

GWL/Power is working on the project of the Nissan Leaf Cargo modification. The Nissan Leaf has become the most available EV on the European market. The cargo modification allows to increase the cargo load for the EV, to be used for d

Energy storage solutions using the electric cars as the...

Energy storage solutions using the electric cars as the battery

GWL/Power is working on the solutions for the energy storage using the electric cars. There are several modes of the operation for the EV integration as an auxiliary power supply:

V2H - vehicle to home - a grid-tied operation where the demand for the ene